WashingMachineHoses.com is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

How to Check the Drain Pump

Easy Steps to Check Your Drain Pump - A Quick Guide

If you're experiencing problems with your washing machine, such as water not draining properly, it could be due to a faulty drain pump. Checking the drain pump is a simple process that can be done in a few steps. Here's how to check the drain pump:

Step 1: Turn off the power supply to the washing machine. This is important to prevent any electrical accidents while checking the drain pump.

Step 2: Locate the drain pump. The drain pump is usually located at the bottom of the washing machine, near the front or back. You may need to remove the front or back panel of the washing machine to access the drain pump.

Step 3: Check for any visible damage or blockages. Inspect the drain pump for any visible damage, such as cracks or holes. Also, check for any blockages in the drain pump, such as lint or debris. If you find any blockages, remove them carefully.

Step 4: Test the drain pump. You can test the drain pump by using a multimeter. Set the multimeter to the ohms setting and touch the probes to the terminals on the drain pump. If the multimeter shows a reading of zero, the drain pump is working properly. If the multimeter shows a reading of infinity, the drain pump is faulty and needs to be replaced.

Step 5: Replace the drain pump. If the drain pump is faulty, you'll need to replace it. You can order a replacement drain pump from the manufacturer or a local appliance repair shop. Follow the manufacturer's instructions for replacing the drain pump.

In conclusion, checking the drain pump is a simple process that can be done in a few steps. By following these steps, you can identify any problems with the drain pump and take the necessary steps to fix them. If you're not comfortable checking the drain pump yourself, it's best to call a professional appliance repair technician to do it for you.