How to Check the Drain Pump Motor

Checking the drain pump motor of your washing machine is an essential step in troubleshooting any drainage issues. Follow these steps to check the drain pump motor:

Step 1: Unplug the washing machine from the power source to avoid any electrical hazards.

Step 2: Locate the drain pump motor. It is usually located at the bottom of the washing machine, near the drain hose.

Step 3: Remove the access panel to gain access to the drain pump motor. The access panel is usually located at the back of the washing machine.

Step 4: Check the drain pump motor for any visible damage, such as cracks or broken parts. If the motor is damaged, it will need to be replaced.

Step 5: Use a multimeter to test the drain pump motor. Set the multimeter to the ohms setting and touch the probes to the terminals of the motor. A reading of zero or infinity indicates a faulty motor that needs to be replaced.

Step 6: Check the wiring connections between the drain pump motor and the control board. Loose or damaged connections can cause drainage issues.

Step 7: If the drain pump motor and wiring connections are all in good condition, the issue may be with the control board. In this case, it is recommended to seek professional help to diagnose and repair the issue.

Step 8: After completing the checks, reassemble the access panel and plug the washing machine back into the power source.

By following these steps, you can easily check the drain pump motor of your washing machine and troubleshoot any drainage issues.